The bundle combines a 61.44 kWh / 614.4 V high-voltage battery cabinet with a 50 kW three-phase hybrid inverter. It supports on-grid / off-grid / hybrid modes, fast transfer and high efficiency across PV, wind and other renewable assets.
HV battery – detailed specifications
- Cell chemistry: LiFePO₄ (LFP 3.2 V / 100 Ah), inherently safe and stable.
- Modular layout: 12 × 5.12 kWh (51.2 V) modules; hot-swap-friendly maintenance.
- Total capacity: 61.44 kWh (usable depends on SOC/DoD setup).
- Nominal voltage: 614.4 V DC.
- Operating voltage range: 480–700.8 V DC.
- Rated current: 25 A (continuous).
- Nominal charge/discharge power: 15,36 kW.
- Cycle life: ≥ 6000 cycles @ 25 ±2 °C, 0.5C/0.5C, 70% SOH.
- BMS: cell-level monitoring, balancing, multi-level alarms and safe shutdown.
- Fire protection: aerosol + water systems, combustible gas detection, emergency exhaust.
- Cooling: forced-air; stable thermal behavior.
- Environmental: −30…+55 °C (derating below −15 °C / above +45 °C); 0–95% RH (non-cond.); altitude ≤ 3000 m (derating > 2000 m).
- Noise: ≤ 75 dB.
- Ingress rating: IP55 (outdoor).
- Communications: CAN / RS485 / TCP; SCADA/EMS ready.
- Dimensions & weight: 740x1040x2330 mm; waga 1220 kg.
- Compliance: UN38.3, IEC62619, IEC61000, IEC62477 (more on request).
-
Solis S6-EH3P-50K-H hybrid inverter – detailed specifications
- AC output: 50 kW, three-phase (400 V), continuous operation.
- Efficiency: ηmax 97.8%; ηEU 97.4%; THDi < 3%.
- PV (DC) input:
- Max PV power: up to ~200% DC/AC oversizing.
- Max PV voltage: 1000 V DC.
- MPPT trackers: up to 4; total 8 strings.
- MPPT operating window: 150–850 V DC.
- Max current per MPPT: ~40 A (up to 60 A per input).
- HV battery interface:
- Battery voltage window: 150–800 V DC.
- Battery ports: 2 × 70 A (140 A combined).
- Max charge/discharge power: up to ~55 kW.
- Operating features: on-grid / off-grid / hybrid; TOU/VPP; 100% phase asymmetry; UPS transfer time < 10 ms.
- Protections: OVP/UVP, OCP, OTP, surge protection, insulation monitoring, anti-islanding.
- Comms & monitoring: CAN / RS485 / Ethernet (opt. Wi-Fi/4G/LAN); SolisCloud; SCADA/EMS integration.
- Thermal & enclosure: active cooling (fan), IP66 (outdoor).
- Dimensions & weight: 530 × 880 × 290 mm; 73 kg.
-
Integration & control
Fully compatible with SCADA/BMS/EMS for remote monitoring, analytics and predictive maintenance. Modular scaling on both PV and storage sides simplifies extensions and retrofits.
