Here are the reasons why you should choose our 12V 100Ah LiFePO4 Kon-TEC battery:
Heating pads and wireless communication
Kon-TEC MG batteries can be charged at low temperatures (below 0 degrees Celsius).
Integrated wireless communication with the Battery Management System (BMS). Provides communication between the battery and a mobile device, allowing real-time monitoring of battery parameters.
Download the installation instructions from the Google Play / Apple Store
or download the application from our website:
Android: Link
Apple: Link
The applications must be extracted on your phone. Then, allow installation on the device.
I. Weight versus battery power
12V 100Ah LiFePO4 Kon-TEC batteries are half the weight and provide higher power output compared to traditional lead-acid, gel, or AGM batteries.
II. High energy efficiency
Our lithium-ion batteries offer very high efficiency (about 99%) and low internal resistance, allowing for fast charging with minimal energy loss. In comparison, lead-acid batteries lose power much faster during discharge.
III. Full use of capacity potential
Kon-TEC LiFePO4 batteries provide 100% of their nominal capacity regardless of discharge current. In contrast, lead-acid batteries provide significantly less usable energy under higher loads and are often limited to 50% of nominal capacity to avoid reducing their lifespan.
IV. Very high durability
The lifespan of Kon-TEC LiFePO4 batteries is around 3000 cycles (full charge and discharge), 4500 cycles at 80% DoD, and 6000 cycles at 60% DoD, depending on the battery's depth of discharge. In comparison, lead-acid batteries typically last only around 200–300 cycles at the same discharge level. The deeper the battery discharge, the shorter its lifespan.
V. Performance gains
Although the initial cost of lithium-ion batteries may seem high, the investment provides significant long-term savings. Kon-TEC LiFePO4 batteries offer much higher efficiency and lifespan compared to traditional lead-acid batteries, ultimately meaning much lower operational, replacement, and downtime costs.
VI. Wireless communication
The batteries are equipped with wireless communication, allowing you to monitor battery charge levels and lifespan via a dedicated application.
VII. 5-year warranty
The high quality of our batteries allows us to offer a five-year warranty.
DESPITE THE HIGHER INITIAL COST OF PURCHASING THE 12V 100Ah LiFePO4 KON-TEC BATTERY, IT IS MORE ECONOMICAL THAN A TRADITIONAL GEL/AGM BATTERY.
BMS
The battery is protected by a BMS system against misuse. It protects against:
- overcharging,
- excessive discharge,
- reverse polarity,
- overheating, short-circuiting.
This practically prevents damage, significantly extending battery life. The presented battery can be connected in series to achieve higher voltage and in parallel to increase capacity. The maximum continuous operating current is 100A.
LiFePO4 battery can be used in a very wide temperature range from -20 to 55 degrees Celsius. Thanks to the use of heating pads, it can also be charged within the range of -20 to 50 degrees Celsius.
Recommended accessories:
Standard chargers:
10 hours of charging – Kon-TEC LiFePO4 12V 10A DL240 Charger
5 hours of charging – Kon-TEC LiFePO4 12V 20A DL400 Charger
Standard chargers for series connections:
24V: 5 hours of charging – Kon-TEC LiFePO4 24V 20A DL900 Charger and 24V Kon-TEC LiFePO4 KT04 Balancer
48V: 5 hours of charging – Kon-TEC LiFePO4 48V 20A DL1200 Charger and 48V Kon-TEC LiFePO4 KT04 Balancer
Waterproof chargers:
6.6 hours of charging – Kon-TEC LiFePO4 12V 15A DL-300WP Waterproof Charger
Waterproof chargers for series connections:
24V: 5.5 hours of charging – Kon-TEC LiFePO4 24V 18A DL-600WP Waterproof Charger and 24V Kon-TEC LiFePO4 KT04 Balancer
48V: 5.5 hours of charging – Kon-TEC LiFePO4 48V 18A DL-1200WP Waterproof Charger and 48V Kon-TEC LiFePO4 KT04 Balancer
